Publicidad
Idiomas disponibles
Idiomas disponibles
• When using an extension
cord, be sure to use one
heavy enough to carry the
current your product will
draw. An undersized cord will
cause a drop in line voltage
resulting in loss of power and
overheating. The following
table shows the correct size to use depending on cord length and nameplate ampere
rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the
heavier the cord.
1. Dust collector
2. Dust container release button
3. Pivot lock button
4. On/off switch
5. Container door
6. Container door release latch
7. Charger
8. Flip-out brush
9. Dust collector extension
Assembly
Adjusting the dust collector
(fig. A - C)
The dust collector (1) has a brush that can
be folded forward for dusting and upholstery
cleaning.
• The dust collector (1) is stored under the
appliance. To adjust for use, unplug the
appliance from the charger (7).
• Press the pivot lock button (3) and rotate
the dust collector (1) to the required position.
• Release the pivot lock button (3) to lock the
dust collector in position
B
Volts
120V
Ampere Rating
More
Not more
Than
Than
0
-
6
6
-
10
Product Features
4
Minimum Gauge for Cord Sets
Total Length of Cord in Feet
0-25
26-50
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
American Wire Gauge
18
16
18
16
A
C
51-100
101-150
16
14
14
12
Publicidad
