Publicidad
Idiomas disponibles
Idiomas disponibles
• Close the dust container door (5). Make sure
that the release latch (6) clicks into place.
For the thorough clean method use the
following instructions.
• The dust container (11) is attached to the
body of the appliance. To remove the dust
container, press the dust container release
button (2) and rotate the dust container
(11) counterclockwise and carefully slide
the dust container clear of the appliance.
• Remove the main filter (13).
• Brush any loose dust off the filter (12).
• To remove the pre-filter, rotate the pre-filter
counterclockwise and carefully slide it clear
of the dust container.
• The dust container can be cleaned.
Wipe with a damp cloth or rinse with
warm soapy water and allow to dry.
• The filters are re-usable and should be
cleaned regularly. Rinse with warm
soapy water and allow to dry.
• Install the pre- filter into the dust
container (11) rotating it clockwise until it
locks into place.
• Install the main filter into the
pre-filter.
• Install the dust container (11) to the
appliance, rotate it clockwise until it locks
into place.
WARNING:
Respiratory Hazard: Never use the
appliance without the filters. Optimum dust
collection will only be achieved with clean filters.
CAUTION:
appliance on when dust container is removed.
Replacing the filters
The filters should be replaced every
6 to 9 months and whenever worn or damaged. Replacement filters are available from
your BLACK+DECKER dealer (cat. no. PVF110):
• Remove the old filters as described above.
• Fit the new filters as described above.
I
Projectile/
Do not turn
6
G
H
J
Publicidad
