Publicidad
EN
Overview
This is the TruVision Bullet IR Camera Pocket
Guide for models TVC-BIR6-MR(-P) and TVC-BIR6-
HR(-P). This guide describes a standard installation.
The camera consists of the following:
Camera with power and video output cables
Sunshield
Refer to the figures on pages 3, 6 and 9 when
performing the camera setup procedures.
Installation
When installing the camera, please use the
mounting bracket.
To install the camera:
1.
Using the mount as a template, place it level
against the mounting surface and mark the
position of the mounting holes.
EN 12
Publicidad
