Publicidad
Idiomas disponibles
Idiomas disponibles
BLUETOOTH®
Make a call from memory
1
Press
to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
"NO PRESET" appears if there is no contact stored.
Bluetooth mode settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then press the
knob.
3
2
Repeat step
until the desired item is selected/activated or follow the instructions
stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
BT MODE
PHONE SELECT*
Selects the phone or audio device to connect or disconnect.
" " appears in front of the device name when connected.
AUDIO SELECT*
"
" appears in front of the current playback audio device.
1 Turn the volume knob to select a device to delete, then press the knob.
DEVICE DELETE
2 Turn the volume knob to select [YES] or [NO], then press the knob.
PIN CODE EDIT
Changes the PIN code (up to 6 digits).
(0000)
1 Turn the volume knob to select a number.
2 Press
1
Repeat steps
3 Press the volume knob to confirm.
RECONNECT
ON: The unit automatically reconnect when the last connected Bluetooth device is within
range. ; OFF: Cancels.
AUTO PAIRING
ON: The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android
device) when it is connected through USB input terminal. Depending on the operating system
of the connected device, this function may not work. ; OFF: Cancels.
20
ENGLISH
.
to move the entry position.
2
and
until you finish entering the PIN code.
INITIALIZE
INFORMATION
* You can only connect a maximum of two Bluetooth phones and one
Bluetooth audio device at any time.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile
between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
"BLUETOOTH"
Default: XX
NOW USING PHONE"
display.
2
Search and select "KD-R9
"KD-R7
BT"/"KD-RD9 BTS"/"KD-RD7 BT"/
"KD-R9 MBS" on the Bluetooth device within
3 minutes.
3
Perform (A), (B) or (C) depending on what appears
on the display.
(A) "PAIRING"
that the same passkey appears on the unit and
Bluetooth device, then operate the Bluetooth
device to confirm the passkey.
(B) "PAIRING"
Bluetooth device.
(C) "PAIRING": Operate the Bluetooth device to
confirm pairing.
YES: Initializes all the Bluetooth settings (including
stored pairing, phonebook, and etc.). ; NO: Cancels.
MY BT NAME: Displays the unit name
("KD-R9
BTS"/"KD-R8
BTS"/"KD-R7
"KD-RD9 BTS"/"KD-RD7 BT"/"KD-R9 MBS"). ;
MY ADDRESS: Shows address of this unit.
.
"CHECK MODE" appears. "SEARCH
"PIN IS 0000" scrolls on the
BTS"/"KD-R8
"XXXXXX" (6-digit passkey): Ensure
"PIN IS 0000": Enter "0000" on the
BT"/
BTS"/
Publicidad
