Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
If you have questions, call 1.800.GE.CARES
In the Commonwealth of Massachusetts:
• This product must be installed by a
licensed plumber or gas fitter.
• When using ball-type gas shut-off valves,
they shall be the T-handle type.
CAUTION:
these instructions completely and carefully.
• IMPORTANT—Save these instructions for
local inspectorʼs use.
• IMPORTANT—OBSERVE ALL GOVERNING
CODES AND ORDINANCES.
• Note to Installer—Be sure to leave these
instructions with the Consumer.
• Note to Consumer—Keep these instructions
for future reference.
PARTS INCLUDED
2 Screws
Foam
Tape
TOOLS YOU WILL NEED
1/8" Drill Bit &
Electric or
Hand Drill
Before you begin—read
2 Hold
Down
Brackets
Flat-Blade Screwdriver
Phillips-
Head
Screwdriver
30" Sealed Gas Cooktop
or
visit our Website at:
• A flexible gas connector, when used,
must not exceed 3 feet.
• Note—This appliance must be properly
grounded.
• IMPORTANT: Leak testing of the appliance
shall be conducted according to the
manufacturerʼs instructions.
• Skill level—Installation of this appliance
requires basic mechanical skills.
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
MATERIALS YOU MAY NEED
Pipe Fittings
Pipe Wrench
Pencil
Ruler or
Straightedge
14
GEAppliances.com
Shut-Off
Valves
Joint Sealant
Saber Saw
Publicidad
