Publicidad
1
2
3
4
5
134
4 8
5
2
3
6
7
1
A.PROC
RETURN
X-OVER
Audio Processor
Operation (Optional)
Adjusting Cross-Over
(X-Over) Point of 2-Way
Divider
If an optional Alpine Channel Divider PRA-H400
is connected, you can control the Divider from
the IVA-C800.
Use this procedure when one or two 2-way-
system or 3-way system channel dividers are
connected.
Press the SOURCE button.
The main menu screen appears on the display.
Press the 4 (A.PROC) button.
The display shows the Audio Processor list
screen.
Rotate the rotary encoder and select the
"Divider" (when one divider is connected) or
"Divider-F and Divider-R" (when two dividers
are connected), then press the rotary encoder
to execute the selection.
The display changes to the Divider mode
screen.
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The mode changes to the Divider Adjustment
mode.
Press the 1 (X-OVER) button. The mode
changes to the Cross-Over Adjustment mode.
English
(To be continued)
Publicidad
