Home Decorators Collection GREENHAVEN 56006 Guía De Uso Y Mantenimiento página 11

Assembly - Hanging the Fan (continued)
6
Mounting the fan motor assembly
(standard mount)
WARNING: When using the standard ball/downrod
mounting, the tab in the ring at the bottom of the slide-
on mounting bracket (A) must rest in the groove of
the hanger ball. Failure to properly seat the tab in the
groove could cause damage to the wiring.
NOTE: The magnet is pre-attached on the canopy bottom
cover for you to remove and install easily.
NOTE: For better performance with the Wi-Fi system, the
Wi-Fi antenna must be mounted to the ceiling outside of
the fan's ceiling canopy.
□
Align the locking slots of the canopy (C) with the two screws
(FF) and alignment post (QQ) in the slide-on mounting bracket
(A).
□
Push up the canopy (C) and turn it clockwise until the alignment
post (QQ) engages to the round hole and the screws (FF) engage
to the key slots.
□
Firmly tighten the two mounting screws (FF).
□
Align the oval shape on the canopy (C) with canopy bottom
cover (JJ).
□
Push up the canopy bottom cover (JJ) until the screw (FF) heads
engage to the slots on the canopy bottom cover (JJ) so that
the magnetic canopy bottom cover (JJ) can be attached to the
bottom of the canopy (C) properly.
11
Please contact 1-877-592-5233 for further assistance.
QQ
View after installation
Wi-Fi antenna mount
outside of the canopy
HOMEDEPOT.COM/HUBSPACE
A
FF
C
B
JJ
D
E