Yamaha SRT-1000 Manual De Instrucciones página 22

Ocultar thumbs Ver también para SRT-1000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Cause
Cannot make the
is not selected as the
input source.
unit paired with
the
A
device.
want to pair with the unit has a
password other than "0000."
The unit and device are too far
apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
Another
connected.
Cannot make a
Another
connected.
connection.
More than nine devices are paired
and the oldest pairing information
is deleted.
No sound is
The
unit with the device is
produced or the
disconnected.
sound is
interrupted
is not selected as the
during playback.
input source.
The unit and device are too far
apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
The device is not set to send
audio signals to the
unit.
Playback on the device has not
been performed.
The device's volume is set to
minimum.
20
Remedy
Select
as the input source.
adaptor, etc., that you
Use a
adaptor, etc., whose
password is "0000."
Move the device closer to the unit.
Move this unit away from the device
that is emitting radio frequency
signals.
device is
Terminate current
connection, and perform pairing with
the new device.
device is
The unit cannot make multiple
connections. Terminate
current
connection, and
make connection for the desired
device.
Perform pairing again. The unit can
retain pairing information for up to
eight devices. When pairing a ninth
device, the oldest pairing information
will be deleted.
connection of the
Perform
connection
operations again (p.13).
Select
as the input source.
Move the device closer to the unit.
Move this unit away from the device
that is emitting radio frequency
signals.
Change the audio output setting and
connection setting on the device.
Perform playback on the device.
Turn up the volume level.

Publicidad

Tabla de contenido
loading

Tabla de contenido