cecotec ENERGY SILENCE 2000 COOL TOWER Manual De Instrucciones página 19

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Control panel
2. Air outlet
3. Front part
4. Control window
5. Base
6. Power cord
7. Back part
8. Handle
9. Water tank screw
10. Grill
11. Plastic tab
12. Water tank
13. Water pump
14. Coolers
2. BEFORE USE
Fix the base to the lower part of the fan's main body.
Fig. 2
Use the screws provided to screw the base to the fan's main body.
Fig. 3
Place the device on a flat and stable surface.
3. PRODUCT ASSEMBLY
Take the product out of the box. Remove all packaging materials.
Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
Assembling
The fan's base is divided in 2 different parts. Put them together making sure they match
properly and ensure they are tightly fixed.
Fix the base to the lower part of the fan's main body.
Use the 4 screws provided to screw the base to the fan's main body.
36 CLIMATIZADOR ENERGY SILENCE 2000 COOL TOWER
Screw both side screws.
Place the device on a flat and stable surface.
4. OPERATION
Fig. 4
Place the device on a stable surface and plug it into a socket.
Turn the speed selector to set the speed between Low (ECO) (3), Medium (4) , High (5) and Off
to stop it (2).
Press the Swing (1) Mode button to start the fan's oscillation with a wide angle of rotation.
Press again this button to cancel this function.
Press the Cooling Mode (6) button to start humidification and cooling function. In order
to improve the cooling effect, insert the ice box in the water tank. Press again to cancel the
function. In order to improve the cooling effect, insert the ice box in the water tank.
Coolers must have been in a refrigerator before operating.
Warning: Make sure the water level is above the "Min" minimum level to avoid the device from
running out of water.
5. CLEANING AND MAINTENANCE
Use a soft dampened cloth to clean the product's surface. Do not use abrasive or corrosive
products.
Do not immerse any part of the fan in water or other liquids.
After cleaning, carefully dry the appliance and make sure that all the electrical parts are
completely dry.
Make sure the air inlet and outlet are kept clean and protected from dust and dirt.
If the product is not going to be used for a long period, unplug it and store it in a dry and safe
place.
Fig. 5
The device should be cleaned at least once a week. Drain the water tank completely and refill
it with fresh water. This will reduce mineral deposits and help extending the lifespan of the
device. Store the device if it is not going to be used in a long time.
To make sure all the parts are dry, turn on the device in Fan mode for 30 minutes before storing
it (the time depends on the humidity conditions). Turn it off and unplug it from the power
supply. Drain all the water from the tank. Clean the water tank with a damp cloth to wipe away
any dust or mineral deposits. Remove the water tank from the device and rinse under fresh
water to remove dirt and dust. To remove the grill, press its two upper tabs and pull gently. Do
not rub the net with your hand to avoid deforming it. Use a damp cloth and clean it carefully.
Clean the filter with a damp cloth carefully. Assemble it back. Cover the device with a clean
ENGLISH
CLIMATIZADOR ENERGY SILENCE 2000 COOL TOWER 37