Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
* Please keep these owner's manual for future reference.
*If you have opened the carton and removed all packages, please disregard the STEP 1. See the STEP 2 directly.
STEP 1
Unpack and identify all parts using the parts list provided.
STEP 2
1) Check each part before using the product. Make sure the
gas supply system is turned "OFF" before assembling. See
Figure I.
2) Locate the battery, remove the plastic cover first. Unscrew
the rubber cap of the Electric Ignitor, place a AAA battery
into the battery case. Make sure the positive pole ("+")
towards the cap. Screw the cap back to the battery case
tightly. See Figure II
3)Place the lava rocks evenly in the fire bowl on the top of
the firebowl. See Figure III.
4) Put the gas tank in the metal stand. Make sure the gas tank
sits on the metal stand completely. Turn the wing screw on
the outer part of metal stand clockwise to secure the gas tank
tightly.
See Figure IV & V
See "LP (Liquid Propane) gas supply
connection" for tank connection
WARNING
** DO NOT COVER THE IGNITION SCREEN when placing the
lava rocks into the fire bowl. Always keep Ignition Screen visible.
This screen must be clear and free of obstructions at all times to insure
proper operation.
The burner of the firebowl must be
covered by lava rocks completely.
Otherwise the flame may be extinguished
occasionally. See the Figure CORRECT
and INCORRECT for reference.
CORRECT
INCORRECT
8
Publicidad
