Publicidad
STEP 2 – PASO 2 - ETAPE 2 - FASE 2 - STEP 2 – STAP 2:
RAISE THE COMPUTER PANEL WHILE CHECK THE SIGNAL CONNECTION, AND INSERT 2PCS M8×20 SCREWS WITH
WASHERS TO FASTEN IT.
STEP 3 – PASO 3 - ETAPE 3 - FASE 3 - STEP 3 – STAP 3:
USE 2PCS ST4X15 SCREWS TO FASTEN THE PLASTIC COVER AT BOTTOM OF STAND PIPE.
FYTTER |WWW.FYTTER.COM
PAG- 17
Publicidad
