Publicidad
Idiomas disponibles
Idiomas disponibles
4. Secure the cable with the two cable clips, as shown
(Fig. 8)
Fig. 8
Cable clips
Grass Collection Bag Assembly + Fitting
The grass collecting bag prevents grass clippings being
thrown across your lawn as you mow.
1. Fit the grass collection bag support rod into the tube of
the grass collection bag (Fig. 9)
Fig. 9
Grass collection
bag support rod
2. Clip the protective leather profiles onto the support rod to
secure the assembly (Fig. 10).
Fig. 10
Protective
leather profiles
3. Lift the ejector flap to the highest position, and assemble
the grass collection bag onto the mower by hooking the
sockets to both ends of the roller bar shaft (Fig. 11).
Cable
Grass collection bag
Fig. 11
Socket
4. Hook the strap hook of the grass collection bag on the
center bar on the lower handle frame (Fig. 12). Adjust the
strap to an appropriate height so that the grass collection
bag does not rub against the ground while mowing or
transporting the unit.
Fig. 12
Strap hook
Locking
strap
5. The mower can be used without the grass collection bag.
When the grass collection bag is not attached, adjust the
ejector flap to a suitable position to shield flying grass
clippings (Fig. 13).
Fig. 13
Operation
This reel mower is intended for private residential use to cut
grass in small lawns and gardens. This reel mower is not
intended to cut grass in public parks, playing fields, farms, or
11
Grass collection bag
Grass collection bag
Ejector flap
Publicidad
