Tripp-Lite U280-016-RM2U Manual Del Propietário página 4

Mounting and Installation
The U280-016-RM2U/U280-032-RM can be mounted with any 2- or 4-post rack with an available
2U space or placed on any flat surface. Mounting hardware and four rubber feet are included for
easy mounting or placement.
Rack Installation
Secure the mounting ears to the unit using the
included hardware. Then attach the USB
charger/hub to the rack by inserting four user-
supplied screws through the mounting ears
and into the mounting holes of the rack rail.
Standalone Installation
The USB charger/hub can be placed on any
level surface that can safely support its weight
plus the weight of the attached cables. When
installing on a desktop or other flat surface,
remove the backing material from the rubber
feet and affix them to the bottom panel at the
corners.
Powering the Hub
Insert the included power cord into the C14
inlet on the rear of the unit, then plug into a
power outlet.
16-02-305-93358F.indb 4
U280-032-RM Shown
U280-032-RM Shown
4
4/1/2016 12:15:43 PM