Dirt Devil Black Label CP24 Manual De Instrucciones página 16

3 Maintenance and care
3.2 Cleaning / changing the exhaust filter
41
CAUTION:
Clean the filter each time you clean the dust filter. Replace the filter if it
is damaged or deformed (see
ries' for ordering information).
CAUTION:
The exhaust filter cannot be washed.
NOTE:
The exhaust filter cover can be locked more easily if you hold the
unlocking mechanism (Fig. 45) and only release it once the exhaust fil-
ter cover is in its limit position.
3.3 Spare parts and accessories
The following accessories and spare parts can be reordered:
Item number
2224001
Filter set consisting of:
1 dual motor protection filter (Fig. 30) +
1 exhaust filter (Fig. 43)
3224002
Filter unit (Fig. 33) consisting of:
1 filter screen +
1 filter cup
M203-5
1 parquet brush
M219
1 mini-turbo brush "Fellino"
M221
1 midi-turbo brush
M232
1 long flexible crevice nozzle
M234
1 large upholstery nozzle
M236-1
1 hard floor nozzle
16
43
42
Chapter 3.3, 'Spare parts and accesso-
Description
44
1. Switch off the appliance ( ).
2. Pull the plug out of the plug socket.
3. Unlock the exhaust filter cover as shown (Fig. 41).
4. Remove the exhaust filter using the tab provided (Fig. 42).
5. Tap the dirt out of the exhaust filter over a dustbin.
6. Finally, remove the dirt from the exhaust filter with a soft brush,
e.g. the furniture brush supplied with the appliance (Fig. 43).
7. Press the exhaust filter back into its console until the tab
audibly engages (Fig. 44).
8. Attach the exhaust filter cover at the bottom first.
9. Lock the exhaust filter cover (Fig. 45).
Accessory parts and spare parts can be reordered through
Page 54, 'International Service'
CAUTION:
Only use original spare parts from the scope of delivery or those that
you have purchased by reordering.
click!
45