Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
1.
You also can continue to pressing the
quickly increase the speed.
2.
If you would like to decrease the speed, just follow the above steps by replacing
the
side with the
minimum speed setting of 1.
SETTING THE SPEED CONTROL MEMORY
The speed control has a memory function that can be set to remember the previous
speed setting. By using this feature, the tool will automatically run at the previously
speed setting when the tool is turned on.
1.
To memorize the current speed of the tool. Turn on the tool and speed up it until
reaching the speed setting you require. Press the power on/off button for about 2
seconds, and then the LCD display will show a steady
NOTE
1.
When the
speed setting of the tool by pressing the speed control button. But that means
any speed setting you select will be memorized in time.
2.
To check if the current speed setting of the tool is really memorized. Restart the
tool. Verify if the LCD display show the same information as figure below.
2.
To turn off the memory function of the tool - Press the power on/off button for
about 2 seconds, and then the
1English1
side of the speed control button. The speed will reach its
symbol is displayed on the LCD display, you still can adjust the
symbol on the LCD display will disappear.
English
side of the speed control button to
symbol.
-12
Publicidad
