Descargar Imprimir esta página

Rapid EG340 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
of glue towards the back of the
tool which in the long-term can
be serious consequences such
as a system blockage at the
front or a break in the heating
system.
In this event:
- Remove the nozzle, beware
with the device being hot.
- Place the tool on its stand.
Leave it plugged in and
heated. Purge the tool by
letting the hot glue fl ow
out under gravity, onto a
disposable support (container,
paper, cardboard,..).
- Insert a new glue stick,
pushing lightly on the trigger.
- Pull the trigger a few times,
to make sure that the old
glue has been completely
cleared and the tool has been
completely purged.
- Replace the nozzle with a new
one.
• In any case, you should never:
- Force the trigger before the tool
has heated up to its working
temperature
- Push hard on the glue stick,
never attempt to remove it from
the back.
• Repair work on the glue gun
should be carried out by qualified
staff only.
• If the power supply cable is
damaged it must be replaced
by the manufacturer, the
manufacturer's after sales service
or a similarly qualified person in
order to avoid any danger.
Electric wiring diagram
220W
Heater
ON/OFF Switch
ENVIRONMENT
Separate Collection. Do not
dispose power tools into
household waste! According
to the European Directive
2012/19/EC on waste of electrical
and electronic equipment.
When the tool needs to be
replaced, or if it is of no further use
it should be brought to a separate
collection centre for recycling.
Warranty and repairs under
warranty
Warranty period: This product
is guaranteed for 2 years from the
date of purchase (original sales
receipt acting as proof).
Warranty conditions: All points
mentioned in this document must
have been fully adhered to.
Warranty repairs: The Esselte-
Rapid After-Sales Service is the
only approved service to carry out
warranty repairs on this tool.
In the event of a claim under the
warranty:
1 Return the product in its original
packaging to the shop or outlet
that supplied you with this
product,
2 Accompany the returned product
Thermostat
Fuse
AC 220~240V
7

Publicidad

loading