HIKOKI DH 36DPE Instrucciones De Manejo página 10

English
NAMES OF PARTS (Fig. 1–Fig. 21)
Handle
Switch trigger
Pushing button
Housing
Side handle
Depth gauge
Drill bit
Front cap
Grip
Name plate
Change lever
Gear cover
Cap*
Motor
LED light
Battery
Display panel
Changeover switch
Display lamp
Auto stop lamp
Indicator lamp
Nozzle
Depth adjustment
button
* Do not remove the cap ( ) from the rotary hammer unless
you are installing the dust extractor system. Operating
the tool with the cap removed will decrease work output.
In addition, dust can clog the net which may result in
malfunction.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
DH36DPE: Cordless Rotary Hammer
To reduce the risk of injury, user must read
instruction manual.
Nozzle adjustment
button
Dust housing
Dust box
Dust box latch
Filter
Adapter
Latch
Charge indicator lamp
Indicator lamp: Lights
Grease
Pushing button
(Change lever)
Cold chisel
Auto stop lamp: Blinks
Auto stop lamp: Lights
Battery sliding
grooves
Terminal (Product)
Air gun
Terminal (Battery)
Sliding grooves
Rubber cover
USB port
USB cable
10
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
V Rated voltage
n
No-load speed
0
Bpm Full-load impact rate
φ
Drilling diameter, max.
max
Weight*
(According to EPTA-Procedure 01/2014)
kg
Concrete
Steel
Wood
Hammering only function
Rotation only function
Rotation and hammering function
Disconnect the battery
Switching ON
Switching OFF
Low mode
Normal mode
Clockwise rotation
Counterclockwise rotation
* Depending on attached battery. The heaviest weight is
measured with BSL36B18 (sold separately).
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.