Publicidad
REHEAT
Reheat program can be used for reheating food from a fridge. Just choose program
START DELAY
You can prepare all products in advance; put them in pot of multicooker and set time when you need program to start. Put products in pot of multicooker; chose program
which you need by Menu button
hours and
button to set minutes. Press Start button
TROUBLESHOOTING
Case
The multicooker doesn't switch on
Dish is not cooked in time
Dish is not cooked in time
Dish is not cooked in time
Dish is not cooked in time
Meal is burnt
CLEANING AND MAINTENANCE
Before cleaning, always unplug the appliance.
Let appliance cool down completely.
Wash the bowl using detergent, rinse with water then dry using soft material.
Do not use dish washing machine to clean the bowl.
Do not use chemical and abrasive cleaners for washing the appliance and accessories.
Detach carefully inner part of the lid, wash with detergent, rinse thoroughly and dry using soft material.
Do not put the bowl into cold water right after cooking, it may cause inner coating damage. Let it cool down. Do not put very cold products on hot surface.
CAUTION: do not let water to get inside the appliance.
Clean the appliance housing when required, using warm water and soft material, do not use any chemical and abrasive cleaners or dish washing detergent.
. Then press Timer button
and set period of time which should pass before the program will start. Press
to confirm time of start delay. Time countdown on display is started.
Cause
There is no incoming power
There is no incoming power
The pot is set unevenly.
Heating plate is dirty.
There is a strange object between the pot and heating plate
Liquid and cereals disproportion
(Reheat) by Menu button
Check power
Check power
Set the pot evenly
Unplug the appliance and let it cool. Clean the heating plate.
Remove the object
Follow our proportions for water and cereals
22
MT-1988/1989
and press Start button
button to set
Solution
Publicidad
