Num'axes PIE1066 Manual De Instrucciones página 23

You can navigate the setting interface by pressing  and .
Press OK to save the selected setting.
Long press the UP/MENU button to go back to the previous page.
Settings
Auto Power Off
(LCD screen)
Mode
Photo size
Video size
Multi-shot
Video length
Programmable options
(default settings in bold characters)
30 sec | 5 min | 10 min
Allows you to set the time before the LCD screen
automatically turns off.
In ON mode, the LCD screen will turn off automatically if
you do not press any button for more than 30 seconds,
5 minutes or 10 minutes and then the product will enter
into operation. If you want to continue with the settings,
put the selector in the OFF position then back in the ON
position then long press the UP/MENU button.
Photo | Video | Photo + Video
− Photo: the camera shoots only photos based on the
configured "Photo size" and "Multi-shot" settings.
− Video: the camera shoots only videos based on the
configured "Video size" and "Video length" settings.
− Photo + Video: upon the same trigger event, the
camera shoots photo(s) first then a video based on the
configured "Photo size/Multi-shot" and "Video
size/Video length" settings.
16 MP | 8 MP | 5 MP | 2 MP
Higher resolution produces better quality photos but
creates larger files that take up more of the memory card
capacity (fills up faster).
FULL HD 1080P | HD 720P | WVGA | VGA
Higher resolution produces better quality videos but
creates larger files that take up more of the memory card
capacity (fills up faster).
1 photo | 2 photos | 3 photos
Programmable from 1 up to 3 photos per trigger
Default video length: 10 seconds
Programmable | 10, 15, 20, 30 seconds, 1, 2 or 3 minutes
Guide PIE1066 – Mars 2023 – ind. A - 23/78