Num'axes PIE1066 Manual De Instrucciones página 27

− Long press the UP/MENU button, select "Delete" then press OK.
− Select "One" (to delete the selected photo/video) or "All" (to delete all
photos/videos) then press OK. The message "Delete one?" or "Delete all?"
appears on the LCD screen. Select "Yes" or "No" then press OK.
− Long press the DOWN/REPLAY button to exit.
5.6. Download photos/videos saved on memory card
To download your photos/videos, remove the memory card from the camera and use
a card reader.
Before removing the memory card, the camera must be turned off (switch in the
OFF position). Failing to do so may cause loss of or damage the files already recorded
on the card.
6. Setting up the camera
− Mount the camera facing north or south, not east or west as the rising and setting
of the sun could produce false triggers and overexposed images.
− If you're covering a trail, face the camera down or up the trail.
− Clear out any brush or weeds in front of the camera. These can cause false
triggers due to temperature and motions disturbances in front of the camera
(especially in windy days).
− Check the power level of the batteries.
− Make sure the memory card is properly inserted and have sufficient available
space.
− Verify time and date are correct.
− Make sure to turn the camera ON (switch in the ON position).
7. Technical specifications
Image sensor
Infrared flash setting
Infrared flash range
Memory
Lens
LCD screen
1.2 Mega Pixels Colour CMOS
26 invisible IR LED | Wavelength: 940 nm
Approx. 15 m (49.2 ft.)
Micro SD card from 4GB up to 32GB maximum
(class 10 minimum)
F = 4.3 | F/NO = 2.5 | FOV = 84°
Built-in 1.36" TFT colour screen | 240 x 180 pixels RGB
Guide PIE1066 – Mars 2023 – ind. A - 27/78