Num'axes PIE1066 Manual De Instrucciones página 24

PIR interval
Time Lapse
Time stamp
Timer
Default PIR interval: 20 seconds
Programmable | 5, 10, 15, 20, 25, 30, 35, 40, 45 seconds,
1, 2, 3, 5, 10, 15, 30, 45 or 60 minutes
Allows you to set the desired time interval between
photos/videos upon motion. This option avoids camera
taking to many photos or videos.
Example: if the PIR interval is set to 1 minute, the camera
will wait 1 minute between photo/video recordings with
motion.
OFF | ON
With "Time Lapse" ON, the camera will capture photos or
videos automatically at a pre-set time interval regardless
of whether motions are detected or not.
Select "ON" then press OK to set the interval; the camera
will shoot photos or video clips automatically upon the
user set interval.
WARNING: when the Time Lapse parameter is set to
ON, the PIR sensor is deactivated (there is no motion
detection).
Time Lapse programmable from 00 : 00 : 05 up to
23:59:59.
Example: if Time Lapse is set to 00 : 30 : 00, the camera
will automatically
30 minutes.
The Time Lapse feature can work together with the Timer
feature.
OFF | ON
Select ON if you want the date and time of the image
capture imprinted on every photo.
The moon phase, current temperature and user set
camera ID will also be imprinted on the still photos.
OFF | ON
Each day, the camera will work only during the user set
time period.
Select "ON" then press OK to set the start time (Hr : Min)
and end time (Hr : Min) of the desired working period.
Guide PIE1066 – Mars 2023 – ind. A - 24/78
capture photos/videos every