Voltr SCA1500WAC Manual Del Usuario página 46

EN
• Using the screws provided, connect the 2
central parts of the handle bar to the lower
parts.
• First slide the power cord box with the on / off
handle on the right side of the upper handle-
bar (1). Then slide on the clip which will hold
the power cable (2). Then attach the upper
part of the handle bars to the central parts
using the screws provided (3).
WARNING! The same angle of inclination
must be set for both handle bar supports!
• After installing the handlebar, attach the
power cord along the handlebar using the
plastic cable ties.
46
1
2
3
3
29/03/2023