Robern TENOR DIMMABLE LIGHT Instrucciones De Instalación

Diamond
CONTENTS
DIMMER RECOMMENDATIONS / MODEL NUMBERS - 2
TOOLS NEEDED / PARTS - 3
NOTES - 4
REPLACING ENDCAPS - 5
ASSEMBLING THE BRACKETS - 6
MOUNTING THE BRACKETS TO THE CABINET - 7
MOUNTING THE BRACKETS BETWEEN CABINETS FOR GANGING- 8
WIRING THE ELECTRICAL ENCLOSURE - 9
RECESSED INSTALLATION AND ELECTRICAL WIRING - 10
SURFACE INSTALLATION AND ELECTRICAL WIRING - 11/12
FINAL ASSEMBLY - 13
PRODUCT ALIGNMENT - 14/15
USE & MAINTENANCE / WARRANTY - 16
GENERAL INFORMATION
This instruction sheet contains information on how to install the Tenor Light(s). This series comes in many variations. Please refer to the
box or product label for the specific model number. A key is provided on page 2.
Save these instructions for future use and reference. An improper installation voids the warranty. Carefully inspect the light(s) for
damage. Installed products cannot be returned.
If you experience any problems with your light(s), contact your dealer or Robern directly.
Limited Warranty — One Year Term
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
www.robern.com
800.877.2376
TENOR ™ DIMMABLE LIGHT
Important safety instructions - Save these instructions
Fluted
Scan the QR code
to see the entire
Tenor Series
of lights.
Use the camera app on your
mobile device to look at this and
other QR codes. This will allow
you to quickly access web pages
and other relevant documents.
1
Installation Instructions
Suitable for damp locations
Round
Part no. 209-1400 17-NOV-2022
Tenor Light