Publicidad
REPLACING ENDCAPS
Note: The Tenor Lights ship with Chrome finished endcaps. If an alternate finish is ordered, the correct endcaps are included, but
installation is required.
Note: For overall ease of assembly, it's best to replace the endcaps before installing the Tenor Lights to the cabinet.
1. Using the provided Allen key, loosen the screw holding the existing end cap in place.
2. Remove the screw while taking care to support the glass diffuser. Remove the end cap by pulling up and away from the glass
diffuser.
3. Install new end cap and secure with the color-matched screw provided with the new end cap.
Repeat steps 1-3 for all end caps.
1
2
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
Part no. 209-1400 17-NOV-2022
5
www.robern.com
800.877.2376
Tenor Light
Publicidad
