Hilti SI-AT-22 Manual De Instrucciones página 8

Status
The LEDs show green.
The LEDs flash red.
4 English
Meaning
• When scanning: the barcode, QR
code or data matrix code has
been recognized.
• When tightening, after the impact
wrench has switched off auto-
matically: the tightening operation
was completed successfully.
• When scanning: the barcode, QR
code or data matrix code has not
been recognized.
• When tightening, after the im-
pact wrench switches off: The
threaded fastener could not be
tightened in accordance with the
selected settings. The reason for
this could be, for example, that
the impact wrench was switched
off manually before the correct
torque was achieved.
2343814
*2343814*