Publicidad
Idiomas disponibles
Idiomas disponibles
be stretched as smooth as possible.
Before installing the product check the following points; (1) the fan
impeller turns freely and (2) there are no obstructions to the airflow.
ELECTRICAL CONNECTION
All POWERVENT series fans operate from a standard 120V 60Hz
A.C electrical supply. All wiring must be carried out in accordance with
National Electrical Code, and all applicable state and local buildings
codes.
Electrical connections should be made in accordance with the electrical
wiring diagrams shown in Figure (2) Electrical Wiring.
MAINTENANCE
IMPORTANT: BEFORE CARRYING OUT ANY MAINTENANCE OR
SERVICING, ENSURE THE UNIT IS DISCONNECTED FROM THE
MAINS ELECTRICAL SUPPLY.
All POWERVENT series exhaust fans incorporate sealed for life bearings
and therefore do not require any lubrication. We would recommend
inspection of the product at least once every twelve (12) months to avoid
the excessive accumulation of dust and dirt on the impeller. To inspect
the unit disconnect from electrical supply and remove from ducting. If any
debris is evident on the impeller clean with a damp (not wet) cloth. DO
NOT USE any detergents or abrasive materials for cleaning.
Figure 1. Installing / Instalación / Installation: POWERVENT (PV)
• Models PV-100 through PV-315 / Modelos PV-100 a PV-315 / Modèles
PV-100 à PV-315.
1. Secure mounting bracket to a fixed structure.
Fijar el soporte a la pared o techo.
Fixer le support au mur ou au plafond.
2. Hold the fan up to the mounting bracket fixing holes and place, align
and secure fixing bolts.
Sujetar el ventilador y hacer coincidir los agujeros ranurados en en
el soporte con los del ventilador.
Atornillar y montar el ventilador.
Placer le ventilateur en faisant coïncider les orifices du support avec
ceux du ventilateur, puis placer les deux vis de fixation.
4
Publicidad
