Publicidad
Idiomas disponibles
Idiomas disponibles
If the kettle is operated with insufficient water a built in fail-safe device will automatically
switch it off.
• Unplug your kettle and allow it to cool. When it has cooled down sufficiently the safety
device will reset itself.
•
Once the safety device has reset, lift the kettle and place it onto the power base
again, and then refill your kettle with cold water and use it as normal.
CAUTION: Always unplug the kettle from the mains supply socket and allow it to
completely cool down before cleaning or descaling it. Do not immerse the kettle, power
base or power cord and plug in water or any other liquid.
1. Clean the exterior surface of the kettle with a damp cloth and then polish with a soft
dry cloth. Do not use steel wool pads or harsh/abrasive cleaners.
2. D escale your kettle regularly to keep it working efficiently. Use a proprietary descaling
product following the manufacturer's instructions carefully.
CAUTION: Before removing or refitting the filter, switch off the kettle and empty it. Allow
it to cool completely, then unplug the power base from the mains supply socket. Never
operate the kettle without the filter fitted.
• Open the lid and remove the filter from behind the spout.
• Rinse the filter under a tap whilst brushing it with a soft brush.
• In hard water areas it may be necessary to descale the filter using a descaling
product. Use a proprietary descaling product following the manufacturer's instructions
carefully.
• The filter may be washed safely in the cutlery rack of a dishwasher.
• Refit the filter back into your kettle.
This appliance has no user serviceable parts. Any servicing beyond that described in the
Cleaning Section should be performed by an Authorized Service Representative only.
See Warranty Section.
BVSTKT3101_20SEM1 (LA).indd 5
If the kettle boils dry
Cleaning
Cleaning the filter
User Maintenance
English - 5
12/8/20 2:45 PM
Publicidad
