Num'axes PIE1048 Manual De Instrucciones página 23

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4. Power supply
4.1. Batteries
The camera runs on 8 AA size batteries. The product can work with alkaline or NiMH
rechargeable batteries.
You can purchase alkaline or Ni-MH AA batteries at any time on www.numaxes.com.
We strongly recommend changing the batteries when the power icon on the screen is
empty.
NOTE: Don't mix battery types! This may cause permanent damage not covered by the
guarantee.
4.2. Power adaptor
This camera can also be powered by an external adapter 6V/1A.
The DC port is located at the bottom of the device.
The power connector is a 3.5x1.35mm coaxial DC power plug with positive tip polarity.
Do not remove the batteries from the device when a power adapter is used.
DC power is recommended if the camera is used for security purposes.
5. SD card
Using a memory card (from 4GB up to 32GB – class 10 minimum) is required to operate the
camera. When the camera is in TEST mode and no memory card is inserted, the LDC screen
displays "No SD card".
Formatting the SD card in the trail camera before using it for the first time is strongly
recommended, especially when the card has been used in other devices. An SD card
formatted in another device may not be compatible.
Before inserting or removing the SD card, the camera must be turned off (switch in the
OFF position). Failing to do so may cause loss of or damage the files already recorded on the
memory card.
When the SD card is full, the LCD screen indicates "Memory full".
PIE1048 - Indice A – Juillet 2020
Before inserting or removing the batteries,
the camera must be turned off (switch in the
OFF position).
When inserting the batteries, make sure to
follow polarity indicated inside the battery
slots. Upside down batteries may cause device
malfunction.
23/88

Publicidad

Tabla de contenido
loading

Tabla de contenido