Before connecting or disconnecting the device, make sure that On/Off
pushbutton is in off position.
To turn on the device, you must insert the plug into the socket, turn on by
press On/Off pushbutton (2) and enable the ambient thermostat (1) by
rotating it clockwise to the maximum position.
Once the desired room temperature is reached, turn the thermostat (1)
slowly, in a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The indicator light indicates that the appliance is operating and will switch
off when the adjustable thermostat is activated.
Before replacing the appliance in its package, make sure it has cooled
sufficiently.
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
14
Maintenance
GB