H
ow to use washer
Child Lock
Use this option to prevent unwanted use of
the washer or to keep cycle settings from
being changed while the washer is operating.
• Child Lock can be set by pressing and
holding the Wash and Rinse button
simultaneously. (About three seconds)
• When CHILD LOCK is set, the Child Lock
indicator will appear and all buttons are disabled
except the POWER button.
• To deactivate Child Lock system, press and
hold the Wash and Rinse button
simultaneously again. (About three seconds)
• To change to the desired program, whilst in
Child Lock mode.
1. Press and hold both Wash and Rinse
button together once again.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
NOTE
• CHILD LOCK lasts after the end of cycle.
If you want to deactivate this function, Press
and hold the Wash and Rinse button
simultaneously for 3 seconds.
22
Change
the desired
program
Rinse
• By pressing the Rinse button, the Rinse
type can be selected.
• Duvet, Silent perform 4 Rinses.
• Cotton, Sports Wear, Dark Wash,
Cold Wash, Wool, Sanitary, Heavy Duty
perform 3 Rinses.
• Speed Wash performs 2 Rinses.
• Rinse+Spin performs 1 Rinse.
The matching indicator lamp will light up for
identification.