TriPollar STOP Vx 2 Manual De Instrucciones página 14

RECOMMENDED TREATMENT GUIDELINES
The following treatment guidelines are recommended for using the TriPollar Stop VX2
device:
• Treating the entire face takes up to 15 minutes. For shorter treatment times focus on
selected areas of concern. Treatment times differ for each person.
• Facial DMA treatment takes approximately 10 minutes.
• For optimal results, use the TriPollar Stop VX2 device 2-3 times a week for a period of
6-8 weeks.
• Make sure that you allow at least one day in between treatments on the same
treatment area.
• To maintain long-term results after finishing the full course of treatments, we
recommend that you use your TriPollar Stop VX2 device 2-4 times a month or as
needed.
• If the orange indicator light and sound indicators still do not appear within 5 minutes,
or if you do not feel any heating, try moving the device as slowly as possible without
stopping the motion. Slow, circular, constant movements are more effective than
rapid movements. The slower the movement, the faster the treatment area heats
internally.
• If the orange indicator light and sound indicators do not appear after 3–5 minutes,
select a higher power level. If the indicators still do not appear after increasing to the
High power setting, try moving the device more slowly, without stopping the motion.
• If the orange indicator light and sound indicators turn ON immediately or if you feel
excessive heat, select a lower power level.
14