LD Systems AMP 106 T Manual De Usuario página 12

UNDER / ON-TABLE MOUNTING
There are two recesses on the top and bottom of the enclosure, each with two M3 threaded
holes, for mounting underneath or on top of the table. Screw the two enclosed mounting plates
to the top or bottom side using the enclosed M3 countersunk screws. Now the amplifier can be
fixed in the desired position (see illustration, fixing screws not included). For tabletop mounting,
the four rubber feet must be removed beforehand.
CARE, MAINTENANCE AND REPAIR
To ensure the proper functioning of the device in the long term, it must be cared for regularly
and serviced as required. The care and maintenance requirements depend on the intensity of
use and environment.
We generally recommend a visual inspection before each start-up. Furthermore, we recommend
carrying out all the maintenance measures listed below every 500 operating hours or, in the
case of less intensive use, after one year at the latest. Defects due to insufficient care may result
in limitations of the warranty claims.
MAINTENANCE (user performable)
WARNING! Prior to any maintenance measures, the voltage supply and, if possible, all
device connections must be disconnected.
NOTE! Improper maintenance may impair the device or even destroy it.
12
WENN NICHT ANDERS DEFINIERT: OBERFLÄCHENGÜTE:
BEMASSUNGEN SIND IN MILLIMETER
OBERFLÄCHENBESCHAFFENHEIT:
TOLERANZEN:
LINEAR:
WINKEL:
NAME SIGNATUR DATUM
GEZEICHNET
GEPRÜFT
GENEHMIGT
PRODUKTION
QUALITÄT
ENTGRATEN
UND SCHARFE
KANTEN
BRECHEN
BENENNUNG:
WERKSTOFF: ZEICHNUNGSNR.
GEWICHT:
MASSSTAB:1:1
ZEICHNUNG NICHT SKALIEREN ÄNDERUNG
PRODUCTNAME
Art No. XXX
BLATT 1 VON 2
A2