LD Systems AMP 106 T Manual De Usuario página 13

1. Housing surfaces must be cleaned with a clean, damp cloth.
Make sure that no moisture can penetrate the device.
2. Air inlets and outlets must be regularly cleaned of dust and dirt.
If compressed air is used, make sure that damage to the device is prevented
(e.g. fans must be blocked in this case).
3. Lines and plug contacts must be cleaned regularly and dust and dirt must be removed.
4. In general, no cleaning agents or abrasive agents may be used, otherwise the surface
finish may be damaged. Especially solvents, such as alcohol, can impair the function of
housing seals.
5. Devices must generally be stored dry and protected from dust and dirt.
MAINTENANCE AND REPAIR (by qualified personnel only)
DANGER! There are live components in the device. Even after disconnection from the
mains, residual voltage may still be present in the device, e.g. due to charged capacitors.
NOTE! There are no assemblies in the device that require maintenance by the user.
NOTE! Maintenance and repair work may only be carried out by qualified personnel
authorized by the manufacturer. In case of doubt, contact the manufacturer.
NOTE! Improperly performed maintenance work may affect the warranty claim.
DIMENSIONS
106
221,7
13