MoMi MIYA Manual De Instrucciones página 10

• Check that the seat mounting devices are properly engaged before use
• The product is intended for children from 6 to 36 months of age, up to a weight of 22 kg
• The product is intended for the transport of one child at a time
• Maximum load on the basket under the stroller up to 3 kg.
• The brakes should be locked when putting in and taking out your baby
• Each additional load suspended on the handles of the stroller makes it lose its stability
• Only use parts and accessories that have been supplied or recommended by the manufacturer
• Do not place the product near an open flame or other heat sources
• Do not leave the stroller on slopes, even with the brake applied
• Regularly check the technical condition of the stroller
• Do not use the stroller on uneven surfaces, near fire or other hazardous places
• Do not use the stroller on stairs. Fold the stroller before going down or up stairs
• Additional luggage put in the stroller may lead to the loss of its stability
• Do not use the product if you are in any doubt about the correct operation of the wheechair or its
safety
• The set does not include a mattres
PRODUCT COMPONENTS
1. Folding buton
2. Canopy with extension part
3. Push handle
4. Bumper
5. Seat belts
6. Adjustable backrest
ASSEMBLING AND USE
1. Before assembling, make sure that nothing is missing
2. Place the frame on a flat surface and unlock the frame lock button (as shown at picture 2).
3. Grab the handle and pull it upwards to unfold the frame (as shown at picture 3).
4. To install the front wheels, put them on the mounting shafts in the front of the frame until you hear
a click, then you can be sure that the wheels are properly and securely assembled (as shown at
picture 4). To remove the front wheels, press the quick release button (as shown at picture 5).
5. The button on the back of the front wheel allows to block them (Fig. 6). To block manoeuvring, pull
the button down.
6. To install the rear axle with brake, insert it in the plastic holes at both ends of the brake into the
metal tube of the frame until you hear a click (as shown at picture 7)
7. Install the rear wheels by inserting them into the holes on the rear axle until you hear a click,
then you are sure that the wheels are properly and securely assembed (as shown at picture 8). To
remove the rear wheels, press the lock button and pull the wheels out of the holes (as shown at
picture 9).
8. To install the seat bar, grasp it with both hands and align it with the connectors on both sides of the
wheelchair. Press the headband into the connectors until you hear a click. Pull the headband to
make sure that it is properly seated. To take out the bar press the buttons located on the underside
of the bar.
PRODUCT FEATURES
• The canopy can be adjusted to many different positions as needed. The canopy can be enlarged by
an additional part by unfastening the zip fastener and pulling the canopy forward (pic.11).
10
7. Textile basket
8. Rear wheel brake
9. Rear wheels
10. Footrest
11. Front wheels
EN