Automatic Station Search
If you do not want to set the stations manually, you can have the device
search for them automatically. Proceed as follows:
Power the device on by pressing the ON/OFF button [2].
Press and hold the PRESET button [6] for approx. 4 seconds. The
search is started and any stations found are saved automatically.
Press the PRESET button [6] again to cancel the search.
Selecting a Saved Station
To select a station from a preset, the device has to be powered on. If
it is powered off, press the ON/OFF button [2] to power the device
on.
Press the PRESET button [6] briefly. The current station preset (P01 to
P20) selected is shown.
Press the – [7] or + [8] button to select a different station (preset).
Please note that a maximum of 20 stations can be saved.
If more than 20 stations are found, only the first 20 are
saved.
SRW 250 A1 Alarm Clock Radio
English - 69