Frigomat FR260 Manual De Uso Y Mantenimiento página 65

Fig.1
Fig.2
Fig.3
Fig.4
In order to correct any initial programming errors,
during the execution of the GR2 cycle it is always
possible to vary the time setting via the following
procedure:
- With the cycle in progress, press the SLUSH key
once. (fig. 1)
- The LEDs of the UP, Confirm and DOWN keys
light up and the GR2 message relative to the cycle
in progress is viewed on the display. (fig. 2-3)
- Press the SLUSH key again.
- The numbers relative to the previously configured
time setting appear on the display: press the UP
and DOWN keys to correct the value.
- Press the CONFIRM key to validate the new data
and exit programming. (fig. 4)
ENGLISH - 26