Frigomat FR260 Manual De Uso Y Mantenimiento página 69

Fig.6
Fig.7
Fig.8
Handle the door with great care: because of its
great weight, should it fall, it could cause
injuries to staff and damages to things.
• Rest the door on a clean work surface and
disassemble its parts:
1. Remove the lid from the hopper (Fig.6).
2. Remove the front door (Fig.7).
3. Lower the handle, remove the pin and
remove the draw valve from its seat (Fig.8).
4. Use the tool to remove O-rings from their
seats.
• Immerse
the
components into the tub with the sanitising
solution and brush clean the surfaces with care.
Pay particular attention to the inner conduit of
the dispensing tube and to the seal seats.
All the disassembled parts must remain soaking
in the sanitizer for at least 20 minutes before
they are rinsed with plenty of cold drinking
water
previously disassembled
ENGLISH - 30