Black and Decker LSTE523 Manual De Instrucciones página 2

SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols
below are used to help you recognize this information.
DANGER:
result in death or serious injury.
WARNING:
could result in death or serious injury.
CAUTION:
may result in minor or moderate injury.
NOTICE:
Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
Important Safety Warnings
WARNING:
gardening appliances, basic safety
precautions should always be followed to
reduce risk of fire, electric shock, and
personal injury, including the following.
READ ALL INSTRUCTIONS
• ALWAYS WEAR EYE PROTECTION
– Wear safety spectacles or goggles at
all times when battery is installed. These
items are available for purchase.
• GUARD – Do not use this appliance
without guard attached.
• DRESS PROPERLY – Do not wear loose
clothing or jewelry. They can be caught
in moving parts. Gloves and substantial
rubber soled footwear are recommended
when working outdoors. Don't operate
the appliance when barefoot or wearing
open sandals. Wear heavy long pants
to protect your legs. Wear protective hair
covering to contain long hair.
• NYLON LINE – Keep face, hands and feet
clear of rotating nylon line at all times.
• THE ROTATING LINE PERFORMS A
CUTTING FUNCTION – Use care when
trimming around screens and desirable
plantings.
• KEEP ALL BYSTANDERS AWAY – at a safe
distance from work area, especially children.
• IMPORTANT WARNING – When being
used as an Edger, stones, pieces of metal
and other objects can be thrown out at high
speed by the line. The appliance and guard
are designed to reduce the danger. However,
the following special precautions should be
taken: MAKE SURE that other persons and
pets are at least 100 feet (30m) away.
• TO REDUCE THE RISK of rebound
(ricochet) injury, work going away from any
nearby solid object such as wall, steps,
large stone, tree, etc. Use great care when
working close to solid objects and where
necessary, do trimming by hand.
• AVOID ACCIDENTALLY STARTING –
Don't carry with finger on trigger when
battery is installed.
Indicates an imminently hazardous situation which, if not avoided, will
Indicates a potentially hazardous situation which, if not avoided,
Indicates a potentially hazardous situation which, if not avoided,
When using electric
• USE THE RIGHT APPLIANCE – Do not
use this appliance for any job except that
for which it is intended.
• DON'T OVERREACH – Keep proper
footing and balance at all times.
• DON'T FORCE APPLIANCE – It will do the
job better and with less likelihood of a risk of
injury at the rate for which it was designed
• DAMAGE TO UNIT – If you strike or
become entangled with a foreign object,
stop appliance immediately, remove
battery, check for damage and have any
damage repaired before further operation
is attempted. Do not operate with a
broken hub or spool.
• REMOVE BATTERY – when not in use,
when replacing line, or prior to cleaning.
• AVOID DANGEROUS ENVIRONMENTAL
CONDITIONS – Do not use electric
appliances in damp or wet locations. Follow
all instructions in this Instruction Manual for
proper operation of your appliance. Don't
use the appliance in the rain.
• DO NOT OPERATE portable electric
appliances in gaseous or explosive
atmospheres. Motors in these appliances
normally spark, and the sparks might
ignite fumes.
• STORE IDLE APPLIANCES INDOORS –
When not in use, appliances should be stored
indoors in a dry, locked-up place out of reach
of children.
• STAY ALERT – Do not operate this
unit when you are tired, ill, or under the
influence of alcohol, drugs, or medication.
• MAINTAIN APPLIANCES WITH CARE
– Follow instructions in maintenance
section. Keep handles dry, clean and
free from oil and grease.
• CHECK DAMAGED PARTS – Before
further use of the appliance, a guard or
other part that is damaged should be
carefully checked to determine that it will
operate properly and perform its intended
function. Check for alignment of moving
parts, binding of moving parts, breakage of
parts, mounting, and any other condition
that may affect its operation. A guard
or other part that is damaged should
2