Descargar Imprimir esta página

Soundcore Sport X10 Manual Del Usuario página 5

Publicidad

Pairing with another device: Place the earbuds in the charging case and leave
the case open. To enter pairing mode, press and hold the button on the case
for 3 seconds until the 3 LED indicators flash white in sequence continuously.
Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
Mono mode: When Bluetooth connected, you can use either one of the
earbuds only by placing the other one into the charging case.
When powered on and connected, if either one of the earbuds is out of
battery and powered off, you can keep using the other one.
When you are on a call, place either one of the earbuds into the charging case,
and the microphone in the other earbud will be activated.
Controls
Stereo Mode
Play/Pause
Next track
Volume up
Volume down
ANC
Soundcore
Sport X10
Soundcore
Sport X10
PAIRING
3s
CONNECTED
3s
Press twice (R)
Press twice (L)
Press once (R)
Press once (L)
Press and hold for 2 seconds(R/L)
03 EN

Publicidad

loading