Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION - General
The appliance is intended only for domestic use,
not for professional use.
1. Speed adjustment switch
2. Louver switch
3. On-/Off switch with timer
4. Rotating grill
5. Fan
6. Power cord and plug
OPERATION - Before first use
Remove the fan from the packaging and remove all packaging materials.
OPERATION - Ventilate
1. Put the fan on a horizontal and clean floor.
2. Point the front of the fan in the direction which
you wish to ventilate.
3. Put the plug into the wall socket.
4. Switch on the fan by turning the on-/off switch
with timer (3) to 'ON'. Set the speed of the fan
using the speed adjustment switch (1):
a. Position 1, the fan operates at low speed.
b. Position 2, the fan operates at normal speed.
c. Position 3, the fan operates at high speed.
- Turning the speed adjustment switch clockwise
will cause the fan to start at the lowest speed
- Turning
the
speed
counterclockwise will cause the fan to start at
the highest speed.
5. The louver switch (2) can be used to activate
the rotating function of the grill. The rotation
direction of the rotating grill is random and.
6. Switch off the fan by turning the on-/off switch
with timer (3) to 'OFF'. Also set the speed
adjustment switch (1) to '0'.
Timer mode
The fan is equipped with a timer (3) that allows you
to turn the fan off automatically at the end of a set
time (Max. 60 minutes). If you want to adjust the length of time after selecting a certain time, you must first
set the on-/off switch (3) to 'OFF'. After that you can set a new time.
Tip-over safety protection
The fan is equipped with a tip-over safety protection which becomes active whenever the fan tips over.
The fan will then stop turning automatically. As soon as you put the fan back into a stable position, the fan
will start turning again.
adjustment
switch
20
1.
SPEED
0
3
1
2
2
1
3
0
1.
0
SPEED
3
1
STOP
2
2
1
3
0
60
50
3.
40
EN
2.
STOP
MOVE
ON
60
OFF
3.
50
10
40
20
30
4.
5.
6.
2.
MOVE
ON
OFF
10
20
30
Publicidad
