Descargar Imprimir esta página

Kohler K-T10184 Guia De Instalacion página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Adjust the Handle Assembly
Ensure the valve stem adapter is lightly placed over the spline
adapter.
Place the handle assembly over the valve stem adapter.
Turn the handle assembly counterclockwise until the valve is fully
closed. The handle will be in the vertical, 6 o'clock, position.
Remove the handle assembly and set aside.
To adjust for handle alignment:
NOTE: The spline adapter allows fine adjustment of the handle
alignment.
Remove the handle assembly and the valve stem adapter.
Reposition the spline adapter.
Reinstall the handle assembly and the valve stem adapter.
Check the alignment. Repeat this procedure until the handle
alignment is satisfactory.
1041505-2-J
Valve
Spline Adapter
Valve Stem
Adapter
Handle
Assembly
4
Kohler Co.

Publicidad

loading