Publicidad
Idiomas disponibles
Idiomas disponibles
Mod. 9.2482_03-2017_Layout 1 23/03/17 14.17 Pagina 9
TEChNICAL DATA
TYPE
INSULATION CLASS
ABSORBED POWER W
ELECTRONIC SPEED CONTROL
n0 IDLE RPM /min
Ø ORBITAL DIAMETER mm
PAD SHAPE
PAD DIMENSIONS mm
ExTRACTION SYSTEM (*)
WEIGHT Kg according to EPTA-Procedure 01/2003
TYPE
INSULATION CLASS
ABSORBED POWER W
ELECTRONIC SPEED CONTROL
n0 IDLE RPM /min
Ø ORBITAL DIAMETER mm
PAD SHAPE
PAD DIMENSIONS mm
ExTRACTION SYSTEM (*)
WEIGHT Kg according to EPTA-Procedure 01/2003
The values shown are based on a nominal voltage of 230V/50Hz. In the case of voltages and frequencies of different power values may vary.
Refer to the label technical specifications to the nominal values of the tool.
(*) The tool must be connected to a suitable dust extraction system (see DUST EXTRACTION)
GENERAL wARNINGS
All instructions concerning safety and the prevention of industrial accidents
can be found in file SAFETY INSTRUCTIONS, that forms integral part of this
documentation. This INSTRUCTION MANUAL only contains additional
information that specifically explain how to use the tool.
SPECIFIC USE
This electrical tool is designed to operate as a sander, suitable for dry
sanding of wood, plastic, metal, plaster and painted surfaces. Read all safety
warnings, instructions, illustrations and specifications supplied with this tool.
Failure to respect all instructions indicated below can cause an electric
shock, fire and/or a serious accident.
LE71T
LE71TE
LS71T
/ II
200
NO
YES
NO
13000
7000-13000
13000
2
RECTANGULAR
80x130
AUTO-ExTRACTING
1,2
LE71TC
LE71TEC
LC71T
/ II
200
NO
YES
NO
13000
7000-13000
13000
2
RECTANGULAR
80x130
AUTO-ExTRACTING
1,3
SAFETY INSTRUCTIONS FOR SANDERS
Do not use accessories that are not specifically designed for the intended
use of the tool or that have not been recommended by the manufacturer.
The fact that an accessory can be fixed to the tool does not imply that it can be
used safely.
The rated speed of accessories must be at least equivalent to the maximum
speed of the tool. If operated at a greater speed than the rated one,
accessories may break and cause the ejection of chips.
The external diameter and thickness of accessories must be appropriate to
guarantee the protection and safety of the tool. Accessories with incorrect
dimensions cannot be adequately protected or controlled.
LS71TE
LR71TE
/ II
200
200
YES
YES
7000-13000
7000-13000
2
TRIANGULAR
CIRCULAR
-
Ø 125
AUTO-ExTRACTING
AUTO-ExTRACTING
1,2
1,2
LC71TE
/ II
200
YES
7000-13000
2
RECTANGULAR
80x197,5
AUTO-ExTRACTING
1,3
/ II
2
9
Publicidad
