Ultenic D5 Serie Guia De Inicio Rapido página 2

Notes Before Cleaning
Remove any objects may entangle the robot,
such as power cords, ropes, etc.
Keep the robot away from any furniture that
may have the space ≤ 2.87in/ 73mm on the
bottom as the thickness of the robot is
72mm. It may get stuck if the robot goes in by
accident. The Boundary Strip(s) could be
used in this situation.
The robot may climb on top of objects less
than 0.63in/ 16 mm in height. Please take
the objects away if you do not want the
robot to climb it.
Keep the robot away from any area or item you do not want it to clean, apply the Boundary
Strip(s) on the floor with adhesive tape to create a virtual barrier. Make sure the strips are placed
FLAT on the floor.
Keep the robot away from wet areas during
cleaning.
Fold tasseled edges of area rugs underneath
to prevent tangling the robot. Avoid
cleaning very dark-colored high-pile rugs or
rugs thicker than 1.02 in/ 26mm as they may
cause the robot to malfunction.
Do not expose the robot to strong light or
direct sunlight as it may cause the
invalidation of se nsors and abnormity of
robot.