Ultenic D5s Pro Guia Del Usuario página 6

Control the Robot with Amazon Alexa
IMPORTANT TIPS：
a. Make sure the robot has enough power and the Power Switch of the robot is
pressed to ON.
b. You have connected the robot to Ultenic APP.
c. Make sure you've installed Alexa APP on your mobile device.
d. Make sure the WiFi connection is stable.
Step �:
Log in to Alexa APP with your Amazon account, tap "
the homepage, then select Skills & Games.
Step �:
Search and select Ultenic Home, then enable it by tapping ENABLE TO USE.
Step �:
Enter the email address and password for logging in to the Ultenic APP, then tap
Authorize to continue.
Step �:
Tap Done to close the page, then tap DISCOVER DEVICES to discover the robot which
has been connected in Ultenic APP.
Step �:
After the robot is discovered, please tap CHOOSE DEVICE to set up your device.
Step �:
Tap " " and allow Alexa APP to access the microphone of your mobile device.
Then you can say the following voice commands to your mobile device, the robot will
respond accordingly.
"Alexa, turn on the robot (or your robot's name if you changed the device name)."
"Alexa, turn off the robot."
" on the upper left corner of