S.P.E. GREEN6 Manual Del Usuario página 18

User Manual
CHECKING BATTERY CHARGER OPERATION AND CURVE
33) Before charging, make sure that the battery charger is in line
with the voltage of the battery, that the charging current suits the
capacity of the battery and that the selected charging curve (for
lead-acid batteries, or for airtight GEL or AGM type batteries,
Lithium Polymer or Lithium Ion batteries) is correct for the type of
battery to be charged. In case of recharging floor treatment
machine, ensure the machine is switched off and not used.
34) We recommend fitting a fuse between battery charger and
battery. The fuse must be installed along the connection to the
positive terminal of the battery. The rating of the fuse must be
proportionate to the nominal output current of the battery charger,
the diameter of cable used and the environment in which it is to be
installed.
35) We recommend unplugging it from the mains supply before
connecting and disconnecting batteries.
36) During normal operation of the battery charger, the external
surface may become hot and may remain so for a certain period of
time after it has been switched off.
37) The battery charger needs no special maintenance, only regular
cleaning procedures, to be carried out according to the type of
working environment. Cleaning procedures should only be carried
out on the external surface of the battery charger. Before starting
any cleaning procedures, the mains supply cable and battery
cables must be unplugged. Do NOT use water and/or detergents in
general and/or pressure washers of any kind when carrying out
cleaning.
NOT IN USE
38) If safe operation of the battery charger can no longer be
ensured, stop the device and ensure that it cannot be put back into
operation.
Battery type LEAD-ACID, GEL, AGM, LITHIUM
Number of cells = 6 – 12 – 18 – 24 – 36 – 40 – 48
18 D00582-08