Publicidad
Idiomas disponibles
Idiomas disponibles
Do not use dull or damaged bits and accessories
•
to bind in the work piece.
Do not use bits larger then those recommended
•
loss of tool control and personal injury. Large bits may also overload the drill, causing motor and gear
damage.
When removing the drill bit from the tool, avoid contact with skin
•
sufficient time for the bit to cool down or use proper protective gloves to handle the bit or accessory. Drill bits
and accessories may be hot after prolonged use.
Wear cushioned gloves and take frequent rest breaks
•
considerable vibration when in operation which may be harmful to your hands and arms.
Check the tool and remove any chuck keys or adjusting wrenches before
•
switching the tool "ON"
causing an injury.
WArNING:
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
1/2" Spade-Handle Electric Drill
Operator's Manual
. Keys and wrenches can fly off at high speed striking you or a bystander,
read and understand all warnings, cautions and operating
. Dull or damaged bits are more likely
. They are more likely to jam, causing
. Drills can generate
GSHD1290
. Allow
Publicidad
