Bimar VT7-30B Folleto De Instrucciones página 11

 Do not move the appliance when it is in function.
 Do not leave the device exposed to the weather (sun, rain, etc.).
 Do not pull on the cord to disconnect the plug from the socket.
 Do not allow children, or irresponsible persons, to use the device
without supervision.
 If the electric cord is damaged, it has to be replaced by the
supplier or an authorized service center or a professionally
qualified, to avoid any risks.
 Do not use the appliance with a timer or a programmer or
with a system that can switch on the appliance
automatically, to avoid risk of fire, since a fire risk exists if the
applaince is covered or positioned incorrectly.
 Ensure that the fan is switched off from the supply mains before
removing the guard.
INSTALLATION
 After removing the packing materials, check the integrity of the heater; if you
are unsure, do not use it and ask for qualified professional help. The packing
materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the
reach of children because they are potential sources of danger. Attention: any
stickers or advertising material applied to the grid removed before using the
appliance. The manufacturer declines all responsibility in case this is not safe
working practices will be respected.
 Before connecting the appliance, check that the voltage values shown on the
data plate correspond to those of the electricity supply network. In the event
of incompatibility between the electric outlet and the plug of the appliance,
have the outlet replaced with another more suitable type by professionally
qualified personnel, who will make sure that the section of the wires of the
outlet is appropriate for the absorbed power of the appliance. In general, the
use of adapters or extension cords is not recommended; if their use is
indispensable, they must conform to existing safety standards and their
current capacity (amperes) must not be less that the maximum of the
appliance.
11/36