Publicidad
Idiomas disponibles
Idiomas disponibles
OPTION BUTTONS
Your washing machine features several additional cycle
options that customize cycles to meet your individual
needs. To use these options, select the desired option
AFTER selecting the desired cycle.
After selecting the desired cycle and settings, press
the cycle option button(s) for the option(s) you would
like to add. The button will light when that option is
selected. If the selected option is not allowed for the
selected cycle, the chime will sound twice to alert you
and the LED will not illuminate.
NOTE:
y To protect your garments, not every option is avail-
able with every cycle.
y If the START/PAUSE button is not pressed within 60
minutes to start the cycle, the control will shut off
and all settings will be lost.
STEAM
Adding the Steam option to a wash cycle helps provide
superior cleaning performance. By using hot steam,
the fabrics will get the cleaning benefits of a very hot
wash.
WARNING
y Do not touch the lid during steam cycles. The lid
surface can become very hot. Allow the lid lock
to release before opening the door.
y Do not attempt to override the lid lock mecha-
nism or reach into the washer during a steam
cycle. Steam can cause severe burns.
NOTE:
y The steam option cannot be used with all cycles.
y The STEAM option is automatically deselected
if Turbo Wash™ is selected for the NORMAL,
SANITARY, and BRIGHT WHITE™ cycles.
y Steam may not be clearly visible during the steam
cycles. This is normal. Too much steam could
damage clothing.
y Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.
COLD WASH
This option saves energy by using cold water while
increasing the wash and rinse times to maintain wash
performance.
NOTE:
y The Stain Care feature cannot be selected with the
Cold Wash option.
y Wash time will increase up to 50% with the Cold
Wash option.
y For best wash results, only wash small loads (less
than 8 lbs(3,6 kg)) with the Cold Wash option.
DELAY WASH
Once you have selected the cycle and other settings,
press this button to delay the start of the wash cycle.
Each press of the button increases the delay time by 1
hour, for up to 19 hours. Once the desired delay time is
set, press the START/PAUSE button to start the delay
time.
NOTE: If the START/PAUSE button is not pressed to
begin the delay time, the washer will automatically
shut off after 60 minutes and all cycle settings will be
lost.
TURBO WASH™
Adding the Turbo Wash™ option reduces the cycle
time while still providing similar wash performance to
the same cycle without Turbo Wash™.
NOTE:
y The Turbo Wash™ option cannot be used with all
cycles.
y Turbo Wash™ defaults ON for NORMAL and SPEED
WASH cycles.
y Turbo Wash™ is automatically deselected for
NORMAL, BRIGHT WHITES™ and SANITARY
cycles if the STEAM option is selected.
25
HOW TO USE
Publicidad
