Descargar Imprimir esta página

Hoover RC60PET Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
GETTING TO KNOW YOUR CLEANER
A. Dust Bin Assembly
B. Cleaner Main Body
C. On/Off Pedal
D. Park Slot
E. Dust Bin Release Button
F. Cord Reel Pedal
G. Dust Bin
H. Cyclone Body
I.
Vortex Finder ( Metallic Red )
J. Dust Bin Lid
K. Dust Bin Flap Release Trigger
L. Dust Bin Lid Release Button
M. Hose
N. Hose Handle**
O. Suction Regulator*
P. Accessory holder*
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1.
Connect the hose to the cleaner main body, ensuring it clips and locks into position. To
release: simply press the button on the hose end and pull. [1]
2.
Connect the hose handle to the end of the extension tube upper [2a], or accessories
if required. [2b]
3.
Connect the extension tube lower to the carpet and floor nozzle** [3a] or accessories
if required. [3b]
4. The cleaning accessory tools* can be stored after use on the underside of the
extension tube, using the accessory holder provided*.
USING YOUR CLEANER
1. Extract the power cord and plug it into the power supply. Do not pull the cord beyond the
red marker. [4]
2. Adjust the extension tube** to the desired height by moving the extension tube adjuster**
up and raise or lower to the most comfortable cleaning position. [5]
3. After connecting the lower end of the telescopic tube to the Carpet and Floor Nozzle**,
press the floor type selector pedal* on the nozzle to select the ideal cleaning mode::
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for deeper cleaning.
Carpet & Floor Nozzle**: [6]
- Hard floor Cleaning: Press the pedal on the nozzle on Hard Floor mode and adjust the
slider on the nozzle on ALL FLOORS. In this position brushes, wheels and wiper blade are
*Certain Models Only
** May vary according to models
Q. Telescopic Tube**
Qa. Telescopic Tube Latch*
Qb. Telescopic Tube Adjuster**
R. Carpet and Floor nozzle Latch*
S. Carpet and Floor nozzle (GP)**
S1. Carpet Nozzle (CA)**
S2. Hard Floor Nozzle (HF)**
T. Carpet and Floor Nozzle Slider*
U. Floor Type Selector Pedal*
V. Pre-motor Filter
W. Exhaust Filter
X1. Dusting Brush**
X2. Crevice Tool*
X3. Furniture nozzle*
Y. Pet Hair Remover Mini Turbo Nozzle*
Z. Allergen Remover Mini Turbo Nozzle*
AA. Parquet Nozzle*
lowered to protect hard floors. [6a]
- Standard Carpet & Rugs Cleaning: Press the pedal on the nozzle on Carpet mode
and adjust the slider on the nozzle on ALL FLOORS. In this position brushes and wiper
blade are raised while wheels are lowered to allow a perfect ease of movement on such
surfaces. [6b]
- Deep Carpet cleaning: Press the pedal on the nozzle on Carpet mode and adjust the
slider on the nozzle on DEEP CARPET CLEANING. In this position brushes, wheels and
wiper blade are raised for a deeper cleaning of your carpet. [6c]
WARNING: It is recommended to avoid potential scratching of wooden floors that the pedal
is not set on hard floor mode and the slider on deep carpet cleaning.
Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [7]
4.
Adjust the suction by moving the suction regulator* to the desired level. [8]
5.
6.
Switch off at the end of use by pressing the on/off Pedal. Unplug and press the cord reel
pedal [F] to wind the power cord back into the cleaner.
Parking and Storage Section
7.
The tube can be parked on back of the cleaner for storage or temporary storage while
in use. [9]
ACCESSORIES
To obtain the best performance and efficiency it is recommended that the correct nozzles
are used for the main cleaning operations. These nozzles are indicated in the diagrams by
the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle of type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended for
occasional use only.
The crevice tool*, furniture nozzle* and dusting brush** are stored on the telescopic tube
through a practical accessories' holder. They can be fitted to the handle or the end of
telescopic tube.
On certain models the dusting brush is conveniently integrated in the hose handle.
Dusting Brush**– For bookshelves, frames, keyboards and other delicate areas. [X1]
Crevice Tool* – For corners and hard to reach areas. [X2]
Furniture Nozzle* – For soft furniture and fabrics. [X3]
Parquet Nozzle* – For parquet floors and other delicate floors. [AA]
Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hair
removal. [Y]
Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen
removal. [Z]
IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal hides and
2
GB

Publicidad

loading