Descargar Imprimir esta página

EAS ELECTRIC EMD122BI-V1 Manual De Instrucciones página 56

Publicidad

Idiomas disponibles

Idiomas disponibles

USING YOUR DISHWASHER
Before using your dishwasher:
1. Set the water softener
2. Loading the salt into the softener
3. Loading the basket
4. Fill the dispenser
Please check the section 1 "Water softener" of PART II: Special
version, if you need to set the water softener.
Loading the salt into the softener
NOTE:
If your model does not have any water softener, you may skip this
section. Always use salt intended for dishwasher use. The salt
container is located beneath the lower basket and should be filled
as explained in the following:
WARNING
Only use salt specifically designed for dishwashers use.
Every other type of salt not specifically designed for dishwasher use,
especially table salt, will damage the water softener. In case of damages
caused by the use of unsuitable salt, EAS Electric does not give any
warranty nor is liable for any damages caused.
Only fill with salt before running a cycle.
This will prevent any grains of salt or salty water, which may have been
spilled, remaining on the bottom of the machine for any period of time,
which may cause corrosion.
Inside
Outside
9
V.3

Publicidad

loading